Advanced Accessory Concepts 6 Switch Relay System - 3001 - AAC3001
6 channels, 2 x 30 amp circuits, 2 x 10 amp circuits, 2 x 5 amp circuits;All Solid State, 12-24 volt;RF Remote switch pad usable inside or outside the vehicle;Bluetooth control from phone/tablet app;Manual buttons for on/off on top of case;DIN connector built in for manual control with conventional toggle switches (harness sold separately);Low voltage cutout to shut down Trigger if battery voltage gets low;100 amp fuse installed on positive input wire for protection;12 to 24 volt out with waterproof connectors;Fuses built in, waterproof cover (30 amp - 1 and 2, 10 amp - 3 and 4, 5 amp - 5 and 6);LEDs to indicate relay on and if fuse is blown, blue for circuit on, red for blown fuse;Waterproof case design, withstands temps to 250 deg. F and below freezing;12 to 24 volt input, 3 wires, ground, switched positive, battery positive; California Residents: WARNING The Trigger System substantially saves installation time! It eliminates the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as a remote control for activating installed accessories from outside the vehicle, dimming and flashing functions for installed lighting, fused circuits with LED indicators to notify of blown fuses - and more.The RF remote utilizes a universal mounting system that will accommodate round surfaces and flat surfaces and is battery powered to simplify wiring further. Its buttons are backlit and it is programmable for security or use with additional remotes. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to the roll bar of a UTV, the buttons on the remote are more easily accessible than the dash switches. No straining against the seatbelt to reach the dash, just a quick reach up and the remote is right at hand. The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to Trigger lights on from outside the vehicle when camping, or for whatever you might need to activate on demand. Save time, simplify your installs, and get out on the trail.