Artec Industries Shock and Lower Link Axle Combo Brackets - BR1088 - A-IBR1088
Lower link angle: 22 deg;Made from 1/4 thick boxed steel plate for strength and impact resistance;Sold as a pair;Includes:Lower link brackets and shock tabs for driver and passenger sideUse with any shock mounting width from 1.25-1.6;2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints;Can be drilled out to larger hole size for 1.25 rod ends with spacers;Grease fitting access on top to allow easy maintenance of your most abused joint;Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint;This kit requires general welding and fabrication skills; California Residents: WARNING Is space tight on your axle and you cant mount your shocks? Or do you need to mount the shocks offset off the axle tube. This combo bracket takes our best selling Lower Link Axle Brackets and combines them with our new Lower Link Shock Tabs to allow you to mount your shocks offset from the axle tube. These tabs work on all three angles of lower link so you dont have to have some big specialty combo bracket that looks goofy and is bigger than a normal link bracket. These tabs also allow you to use different shock mounting widths so you dont have to spend time modifying either the bracket or the shocks to fit within a preset bracket width. Available at 0, 10 or 22* degree angled Lower Axle Link Brackets. The STYLE of the bracket gives a unique, custom one-off look youd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.