Detail
Universal application;For 1.75 inch OD tube;Made from .250 thick steel;Ships as 6 unwelded peices;Accepts 2.625 inch mounting width joints;9/16 inch hole;Angles set at 22 degrees;Bare steel; California Residents: WARNING This bracket allows for triangulated lower links that meet at a 1.75 OD tube between frame rails. This bracket is for use with large joints that have a 2.625 mounting width. This includes, but is not limited to, 1.25 rod ends (heims) with misalignment spacers, and rebuildable cartridge style joints with a 2.5 or 2.625 width (Johnny, Flex, Ballistic, etc). The hole size is 9/16 and can be drilled for larger sizes. The angles are set at 22 degrees each (44 degrees total) to allow use with our angled lower link axle brackets. This bracket is made from .250 thick steel and comes in six un-welded pieces that jig together for easy assembly. We recommend using heavy wall 1.75 tubing for your crossmember for maximum strength. Rod ends are not included, this image is used for illustrative purposes only.